PFR70-33x-F Proportional Priority Flow Regulator,

PFR70-33x-F   Proportional Priority Flow Regulator,

PFR70-33x-F Proportional Priority Flow Regulator, (PFR70-33x-F)

Item In Stock

Product Description

A pressure-compensated electrically-variable three-port flow regulator that is a priority (bypass) type control. This combination valve uses a PV70-33x proportional cartridge and an EC10-40 compensator.

Product Operation

The PFR70-33x-F series will bypass all flow out port ➂ when de-energized at the pressure compensator spring value. When energized, this proportional valve/com-
pensator package will increase and regulate flow out of port ➁, regardless of system working pressure, with an increasing current applied to the solenoid.

Product Features

Excellent linearity and hysteresis.
Optional control orifice sizes.
Hardened spool and cage for long life.
Optional coil voltages and terminations.
Effi cient wet armature construction.

Product Ratings

Operating Pressure: 207 bar (3000 psi)
Pressure Rise: Pressure at ➀ begins to rise higher than the compensating pressure differential when bypass flow exceeds 26.5 lpm (7 gpm).
Internal Leakage: 410 cc/min. (25 cu. in./min.) fully closed at 207 bar (3000 psi) out port ➁
Electrical: 2 standard voltage ratings
Operation of Manual Override: To Engage: Turn clockwise approximately 1 turn to reach start point. Continue another approximately 5 turns to full shift.To Disengage: Turn counterclockwise approximately 6 turns until positive stop is found.
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1;
Filtration: See page 9.010.1
For 12 volt coils, double the current (amp) values shown.37.9/1041.4600LOAD bar/psiFLOW lpm/gpmPriority Port Flow Rate Loss Under LoadPV70-33B with EC10-40 Typical11 bar/160 psi compensator —5.5 bar/80 psi compensator - - -2.8 bar/40 psi compensator • • •82.81200124.11800165.52400206.9300034.1/930.2/822.7/615.1/47.5/226.5/718.9/511.4/33.8/1
Attention Manifold Designers:To obtain these high flow capabilities using proportional flow controls and compensators, optimized cavity drillings are required. Please consult factory.
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROLS
H
YDRA
F
ORCE.com®
Cartridges voltage interchangeable.
Unitized, molded coil design.
Coil waterproofi ng standard.
Screw-in manual override option.
Threshold
Current (mA)

A & B
C
Range
Range 300 ± 70 360 ± 70 150 ± 35 180 ± 35
Coil
Voltage12 VDC24 VDC
Max. Control
Current (mA)

A & B
C
Range
Range 1500 ± 200 1400 ± 200 750 ± 100 700 ± 100