Item In Stock
An in-line plumbed, low leak, load-shuttling hydraulic check valve for use as a direc-tional selector.
The LSV1 will allow flow from the higher pressure of ➀ or ➂ to ➁The valve is commonly used to direct oil from the pressure side of a bidirectional
hydraulic motor to a pressure-released hydraulic brake.
• Hardened seat for long life and low leakage.• Rapid response to load direction changes.• Compact size.
Operating Pressure: 240 bar (3500 psi)
Flow: See Performance Chart
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions
Seal Kit: Non-serviceable
