Item In Stock
A screw-in, cartridge-style, pilot-operated, hydraulic check valve for use in blocking or load-holding circuits. Pilot ratio is 3:1. The cartridge incorporates a low flow thermal relief valve intended to prevent cylinder damage resulting from temperature-induced pressure intensification. Note: The thermal relief feature is not intended for use in dynamic pressure-limiting applciations.
The PC10-38 allows flow from ports 2 to 3, while blocking flow in the opposite direc-tion. If the presure at port 3 exceeds the thermal relief setting, a small amount of oil will be allowed to pass from port 3 to port 2, preventing cylinder damage from pres-sure intensification.
• Integrated low flow thermal relief valve.
• Optional sealed piston.
• Hardened seat for long life and low leakage.
• Industry common cavity.
Operating Pressure: 241 bar (3500 psi)
Proof Pressure: 390 bar (5700 psi)
Flow Rating: 45 lpm (12 gpm)
Maximum Internal Leakage: 0.25 ml/minute (5 drops/minute) at 241 bar (3500 psi)
Pilot Ratio: 3:1
Temperature: -40 to 100°C (-40 to 212°F) with standard Buna seals;-26 to 204°C (-15 to 400°F) with Viton seals;-54 to 107°C (-65 to 225°F) with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1
Cavity Tool: CT10-3XX; See page 8.600.1
Seal Kit: SK10-3X-TM; See page 8.650.1
